+1 (506) 855 3355 / 229 8899 / (905) 808 9818
amedrillservice@gmail.com
+1 (506) 855 3355 / 229 8899 / (905) 808 9818
amedrillservice@gmail.com
Eccentric overburden casing drilling tools stand as the most economical solutions. Thanks to their ingenious design, the reaming wing on the bit is retrievable, allowing it to be reused for the next hole. This not only significantly cuts down on equipment replacement costs but also minimizes downtime, enhancing overall drilling efficiency and making it a cost-effective choice for various projects.
Casing drilling, or casing while drilling (CWD) process, is a concept that combining two time-consuming processes, drilling and casing together, performing them at the same time. During the CWD process, powered by DTH hammer, a central piloting bit drives a ring bit to drill a hole wide enough for a casing tube to slide down, drilling and casing processes are therefore performed at the same time.
Eccentric is the most economical solutions because its ingenious reaming wing the bit is retrievable can be used at the next hole. This is particularly design for shallow holes, as is often the case in water well drilling, geothermal wells and for shallow micro-piling work. Odex is ideal for short holes in consolidated overburden. The component of Eccentric system consists of Pilot bits, Reamer bits, Guide device and casing shoe.
When drilling, the reamer bit will rotate out to enlarge the hole which enough for the casing tube slide down behind the reamer. When reached required depth, the drill pipe will drill to the reverse direction and the reamer bit will retract, it is allowing the whole drilling system to pass through the casing.
• Complete types of drilling tools suitable for casing tubes with various diameters;
• Good stability and reliability granted by premium alloy steel material and fine CNC manufacturing process;
• Cost-effectiveness realized by mass production.
| Ame Drill-EDT82 Eccentric Drilling Tool (similar to ODEX82) shank for IR3.5 DTH Hammer (other shanks are optional) | |
| Alternative casings may by used: | |
| Maximum outside diameter (mm) | 108 |
| Minimum inside diameter (mm) | 96 |
| Wall thickness (mm) | 6 |
| Ame Drill-EDT90 Eccentric Drilling Tool (similar to ODEX90) shank for DHD3.5 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 115 |
| Minimum inside diameter (mm) | 102 |
| Wall thickness (mm) | 6 |
| Ame Drill-EDT115 Eccentric Drilling Tool (similar to ODEX115A) Shank for IR DHD340A DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 142 |
| Minimum inside diameter (mm) | 128 |
| Wall thickness (mm) | 7 |
| Ame Drill-EDT115B Eccentric Drilling Tool (similar to ODEX115B) Shank for DHD340 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Manximum outside diameter (mm) | 146 |
| Minimum inside diameter (mm) | 130 |
| Wall thickness (mm) | 8 |
| Ame Drill-EDT140 Eccentric Drilling Tool (similar to ODEX140) Shank for IR DHD350R DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 168 |
| Minimum inside diameter (mm) | 152 |
| Wall thckness (mm) | 8 |
| Ame Drill-EDT145 Eccentric Drilling Tool (similar to ODEX145) Shank for IR DHD350R DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 178 |
| Minimum inside diameter (mm) | 158 |
| Wall thickness (mm) | 9 |
| Ame Drill-EDT147 Eccentric Drilling Tool (similar to ODEX147) Shank for IR DHD350R DTH Hammer (others are optional) | |
| Alternative casing may be used: | |
| Maximum outside diameter (mm) | 183 |
| Minimum inside diameter (mm) | 163 |
| Wall thickness (mm) | 10 |
| Ame Drill-EDT165 Eccentric Drilling Tool (similar to ODEX165) Shank for IR DHD360 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 195 |
| Minimum inside diameter (mm) | 182 |
| Wall thickness (mm) | 6.5 |
| Ame Drill-EDT180 Eccentric Drilling Tool (similar to ODEX180) Shank for DHD360, COP64, SD6 DTH Hammer | |
| Alternative casing may be used: | |
| Maximum outside diameter (mm) | 219 |
| Minimum inside diameter (mm) | 194 |
| Wall thickness (mm) | 12.5 |
| Ame Drill-EDT190 Eccentric Drilling TTool (similar to ODEX190) Shank for IR DHD360 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 219 |
| Minimum inside diameter (mm) | 205 |
| Wall thickness (mm) | 7 |
| Ame Drill-EDT230 Eccentric Drilling Tool (similar to ODEX230) Shank for IR DHD380 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 273 |
| Minimum inside diameter (mm) | 250 |
| Wall thickness (mm) | 11.5 |
| Ame Drill -EDT240 Eccentric Drilling Tool (similar to ODEX240) Shank for IR DHD380 DTH Hammer (others are optional) | |
| Alternative casings may be used: | |
| Maximum outside diameter (mm) | 273 |
| Minimum inside diameter (mm) | 260 |
| Wall thickness (mm) | 6.5 |
Ame Drill, located in Burlington, ON, and Moncton, NB, is your long-term partner.
Our commitment to our customers is that we provide only quality consumables at a competitive price. With our dealers located throughout North America.
Ame Drill is establishing a network of dealers to properly & professionally serve the drilling industry.
English 
French 
Spanish