3 Ways to Produce Self-drilling Anchor Bars
Explains cold, hot, and warm rolling methods for making self-drilling anchor bars, comparing strength, ductility, precision, and suitability for different needs.
3 Methods of Inserting Carbide Buttons For Button Bits
Explore three methods for inserting carbide buttons in button bits: copper brazing, cold pressing, and hot pressing, each offering different benefits in terms of cost and durability.
We are in BCGWA Convention 2024
We are going to stay Kamloops, BC from April 18-20, 2024 to attend BCGWA 2024 Trade Show, Convention and AGM as a member of BCGWA.
Ame Drill DHD350 Hammer Test Report
We have a new customer who tested our newest generation of AME DHD350 hammer, and the customer is delighted with our DTH tools. Till now, the AME DHD350 hammer has drilled more than 4900 meters in granite without replacing the outer tube. Below are the specifications of the testing report: Drill machine: KS-668 Hydraulic DTH […]
Ame Drill has become a member of OSSGA: Enhancing Industry Collaboration and Standards
Ame Drill has become a member of OSSGA.We are proud to be a member of Ontario Stone, Sand & Gravel Association (OSSGA). We are trying our best to contribute ourselves to the industries of Ontario stone, sand & gravel.
Ame Drill has become a member of BCGWA: Enhancing Water Management Solutions
Ame Drill has become a member of BCGWA.We are proud to be a member of The British Columbia Ground Water Association (BCGWA). We hope we can contribute ourselves to the ground water industry in BC.
Ame Drill has become a member of AWWDA: A New Chapter in Water Well Drilling Excellence
We are proud to be a member of Alberta Water Well Drilling Association. We are going to provide better services to the water well drillers in Alberta.
PDCA 2023: Embracing Continuous Improvement Strategies for Success
We will be in PDCA 2023. Please visit us at Booth # TS6724N (North Building) on March 5-8.The PDCA 2023 Value Driven Webinar Series will be held the second Thursday of the month from 2:00pm – 3:00pm ET.
Ame Drill DHD Bit Test Report
Place: Colombia Time: August 2013 Mine & project: Rio Negro, gold mining DTH Drill rig: Atlas Copco ROC L6 DTH button bits configurations: DHD340A 115mm, flat face, hemispherical buttons, 2 flushing holes; Rock formation: Brecciated silica with clay matrix and disseminated sulfide mineralization, detailed photos as below: Average life span of our DHD340A 115mm DTH […]
Ame Drill Taper Bit Test Report
Rock drill model: Pneumatic drill Test place: Ecuador—El Oro, Azuay, Zamora Test model: Taper bit, 11 degrees, 38 mm, 5*9 mm, 2*7 mm, short skirt. Hole depth: 1.2 m. Test result: The golden taper bit drills 175 holes, the yellow taper bit with 1 front hole and 1 side hole drills 160 holes, and the […]
